Clean Room

Products sensitive to contamination are typically assembled in a certified clean room. Labino UV Lamps are used to detect particles as small as 30 μm that are not visible to the human eye and prevent contamination.

Download product information

CLEAN ROOM FLYER

    MB PRO Series UV LED light (New!)

    Introducing MB PRO, a battery powered product that combines the superior optical performance of MB 3.0 and the durability of Hercules EX. Designed to perform in extreme temperatures and harsh working conditions, 24 x 7. Made with penetrant resistant materials and certified with an ingress protection marking of IP68 Waterproof.

    There are four MB PRO Series models, Zeus, Hermes, Selene and Atlas. Depending on the model, the beam diameter is 8-9 inches / 20-22 cm and with intensities that vary from ≈ 4 000 to 9 000 μW/cm2. Zeus and Selene are equipped with a strong white light as well. Spray can holder accessory Athena is available factory installed or as a later addition (PN: A503). 

    VIEW MB PRO SERIES VIDEO

    Selected models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery running times are up to 3.5 hours.

    NDT Technicians, members of NATO military should ask for MB 3.0 Atlas (PN for Battery powered: L153). MB 3.0 Atlas battery with Athena spray can holder attached carries PN: L154.

    Your choice from the top right menu complies with:

    Read More

    Cosmos UV LED Stationery light

    A unique product that was missing from the NDT industry. A UV light, specifically designed to withstand the harsh conditions of a wash station and covering an area of 2 x 2 meters (7 x 7 feet) from a distance of 3 meters (10 feet) – the largest in the world!

    Wash station areas are often neglected, equipped with multiple UV tubes that require frequent replacement or with UV lights that are no longer considered suitable for use on inspection booths.

    Some UV lights designated for wash stations generate excessive heat due to a common design mistake. These lights have several LEDs mounted together in a very small housing. The objective is to forcefully emit as much UV as possible, causing the LEDs to have a short lifetime. Often, you cannot see if LEDs fail because several are mounted together in the same position and unless all are out there is no suspicion of failure. As more LEDs fail, irradiance drops, undetected. The NDT technician should control the equipment and not the equipment the NDT technician.

     

    Read More

    MB 3.0 Series UV LED light

    This compact light is simply Genius! A combination of smart mechanics and efficient electronics, designed to survive extreme temperatures and harsh working conditions, 24x7. Penetrant resistant and certified with an ingress protection marking of IP68 Waterproof.

    There are four MB 3.0 Series models, Zeus, Hermes, Selene and Atlas. Depending on the model, the beam diameter is 8-9 inches / 20-22 cm and with intensities that vary from ≈ 4 000 to 9 000 μW/cm2. Zeus and Selene are equipped with a strong white light as well. Spray can holder accessory Athena is available factory installed or as a later addition (PN: A503). 

    VIEW MB 3.0 SERIES VIDEO

    Selected models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery running times are up to 3.5 hours.

    NDT Technicians, members of NATO military should ask for MB 3.0 Atlas (PN for AC powered: L125, PN for Battery powered: L124). MB 3.0 Atlas battery with Athena spray can holder attached carries PN: L126.

    Your choice from the top right menu complies with:

    Read More

    Inspector KITs for NDT

    The ultimate inspector kit, "Stockholm" (PN: K001) to carry field inspections in a professional and reliable manner. All UV lights included are tested and certified to comply with ASTM E3022-18.

    Stockholm kit (PN: K001) includes 3 highly durable UV lights and 1 UV and White Light meter:

    (a) MB 3.0 Zeus handheld UV light with Athena spray can holder - PN: L122;

    (b) UVG3 2.0 Midlight UV Flashlight - PN: L135;

    (c) UVG5 2.0 Midlight UV Headlight - PN: L128;

    (d) Apollo 3.0 UV and White Light meter - PN: M505.

    VIEW INSPECTOR KIT VIDEO

    UV lights in the standard kit can be replaced with other models within the same series upon request. Selected UV models from each Series have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001.

    Members of the US military should ask for PN: K002 as it has been customized to meet USAF requirements.

    Three additional KITs are available, Gothenburg (PN: K003), Malmo (PN: K004) and Uppsala (PN: K005), if not all four units are required.

     

    Read More

    UVG5 2.0 UV LED Headlight

    UVG5 2.0 UV LED headlight is a compact and adjustable light that frees your hands during inspections, especially useful during yoke inspections or mag bench inspections. It is equipped with a white light block filter.

    UVG5 2.0 is the most durable UV LED headlight in the world. It is as industrial as it gets. The beam profile is the largest and smoothest than any other UV headlight on the market today. Depending on the model, the beam diameter is 3-5 inches / 8-12 cm and with intensities that vary from ≈ 4 000 to 80 000 μW/cm2! VIEW UVG5 2.0 SERIES VIDEO

    Select models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery run time 8-14 hours (continuous) depending on the model. It comes with an acoustic battery indicator that signals the battery time left. All models can be re-charged fully, within 3 hours, without removing batteries.

    Members of the US military should ask for UVG5 2.0 Midlight (PN: L129) – NATO STOCK NUMBER (NSN): 6230640020947.

    Your choice from the top right menu complies with:

    Read More

    GX Series UV LED Stationery light

    Modular stationery UV LED system, designed to work 24x7, that allows you to design the desired covered area by mounting together multiple units.

    GX Orion is the only stationery UV LED system on the market that offers ALL of the following qualifications:

    (a) Certified with an ingress protection marking of IP68 Waterproof,

    (b) classified as penetrant resistant,

    (c) tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001, and

    (d) carries a 4-YEAR WARRANTY, the longest in the industry!

    Six years after its introduction to market, GX Orion has a track record of ZERO failed LEDs. It has been sold to over 50 countries worldwide.

    Members of the US military should ask for GX Orion UV only (PN: L3102).

    View GX Orion video Your choice from the top right menu complies with:

    Read More

    BB 2.0 Series UV LED light

    Powerful, penetrant resistant and with an Ingress Protection 68 (IP68 Waterproof).

    Beam profile is the largest and smoothest than any other portable UV LED light on the market today. Depending on the BB 2.0 Series model (Ikaros, Helios, Artemis), the beam diameter is 10-11 inches / 26-28 cm and with intensities that vary from ≈ 4 000 to 22 000 μW/cm2.

    View BB 2.0 Series video

    Selected models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery running times are up to 7 hours.

    Members of the US military should ask for BB 2.0 Helios (PN for AC powered: L1076, PN for Battery powered: L1077) or BB 2.0 Ikaros (PN for AC powered: L1074, PN for Battery powered: L1075).

    Your choice from the top right menu complies with:

    Read More

    UVG3 2.0 UV LED flashlight

    Powerful, penetrant resistant UV LED flashlight and with an Ingress Protection 68 (IP68 Waterproof). Ideal for inspectors to carry on the NDT floor for quick inspections. This is an extremely light and compact UV LED lamp.

    The beam profile is the largest and smoothest than any other UV LED flashlight on the market today. Depending on the model, the beam diameter is 3-5 inches / 8-12 cm and with intensities that vary from ≈ 4 000 to 90 000 μW/cm2!

    Selected models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery running times are up to 8 hours.

    NDT Technicians, members of NATO military should ask for UVG3 2.0 Midlight (PN: L135) - NATO STOCK NUMBER (NSN): 6230226200609. The Double kit (two UVG3 2.0 Midlights included) is PN: L1086.

    Your choice from the top right menu complies with:

    Read More

    MB 3.0 Iris UV LED light

    Certified with an ingress protection marking of IP68 Waterproof, MB 3.0 Iris is an extremely compact light. It is used together with automated systems that incorporate cameras to inspect hard to reach areas such as pipes interior or simply mount on a mag bench.

    The beam diameter is 9 inches / 23 cm generating an intensity of ≈ 4 000 μW/cm2 at 38 cm (15 inches).

    MB 3.0 Iris has been tested to comply with both ASTM E3022-18 and ISO 3059-12 standards as well as with the internal requirements of all PRIMES, including Rolls-Royce RRES 90061 and Airbus AITM6-1001. It comes as AC (Mains) powered only and it is supplied with a mounting bracket.

    Your choice from the top right menu complies with:

    Read More

    UVG2 2.0 UV LED flashlight

    Powerful, penetrant resistant UV LED flashlight and with an Ingress Protection 68 (IP68 Waterproof). Ideal for leak testing inspectors, forensic inspectors to carry on their belt for quick inspections. This is an extremely light and compact UV LED lamp. Battery running times are up to 8 hours.

    The beam profile is the largest and smoothest than any other UV LED flashlight on the market today. Depending on the model, the beam diameter is 3-4 inches / 8-10 cm and with intensities that vary from ≈ 18 000 to 90 000 μW/cm2!

    Members of the US military should ask for UVG3 2.0 Midlight (PN: L135) - NATO STOCK NUMBER (NSN): 6230226200609. The Double kit (two UVG3 2.0 Midlights included) is PN: L1086.

     

    Read More