Labino is issuing a warning to its customers:

Labino AB would like to caution its customers and encourage them to look for Labino products from authorized Labino distributors listed on this page only. Labino AB has identified several unethical manufacturers of NDT products from low-cost countries that manufacture products to look like Labino products and make use of a logo that is similar to Labino. Labino has put on notice several western distributors of NDT products manufactured in low cost countries that make false statements of being, or have been, Labino associates.

To avoid fake explosion proof products from low cost countries that falsely make use of the unique ATEX EX mark, always ask for the ATEX certification number and check the authenticity of that certification number online as ALL authentic ATEX certificates are available online. All manufacturers are obligated to disclose this number on their literature. ATEX falls under European Directive 2014/34/EU.

Please also be advised that claims by manufacturers from low cost countries that UV LED replacement bulbs for mercury lights are in compliance with ASTM E3022-18, RRES 90061, AITM6-1001 AND NADCAP (!) are false. The ASTM E3022-18 standard requires detailed type test reports and unit test reports be generated and made available to the user of the UV light. These reports are generated using the UV lamp as whole and not using a single part or component. ASTM E3022-18, Section 1.2 clearly states: “These tests are intended to be performed only by the manufacturer to certify performance of specific lamp models (housing, filter, diodes, electronic circuit design, optical elements, cooling system, and power supply combination) and also includes limited acceptance tests for individual lamps delivered to the user”. 

Find a distributor

Labino products are present in over 50 countries via 80 distributors, 25 service centers and 5 Calibration centers for local support. One more calibration center is coming up in Singapore this year. Please find below your nearest distributor, service center or calibration center, anywhere in the world.

NORTH AMERICA: Labino maintains 9 distributors, 5 Service Centers and 3 Apollo 2.0 Calibration Centers in North America. You can calibrate your Apollo 2.0 meter at one of our authorized calibration centers in Chicago (USA), Houston (USA) or Edmonton (Canada):

Labino AB is an ISO 17025 ACCREDITED CALIBRATION LABORATORY. All Labino authorized calibration centers globally follow Labino’s in-house calibration method, traceable to NIST. Labino does not allow parallel calibrations at any of its calibration centers.

NORTH AMERICA Stocking distributors:

EUROPE: Labino maintains 39 distributors, 11 Service Centers and 3 Apollo 2.0 Calibration Centers in Europe. You can calibrate your Apollo 2.0 meter at one of our authorized calibration centers in Sweden, France (upcoming) or Spain (upcoming). Stocking distributors are as follows:

OCEANIA: Labino maintains 2 distributors and 1 Service Center in Oceania. Stocking distributors are as follows:

ASIA: Labino maintains 13 distributors and 2 Service Centers in Asia. You can calibrate your Apollo 2.0 meter at our upcoming authorized calibration center in Singapore starting March 1st, 2020. Stocking distributors are as follows:

This page is under construction and will populate shortly