UV Lights in Compliance with Airbus AITM6-1001

The Airbus AITM6-1001 (issue 12) is a testing method that contains requirements for the control of UV LED lights used in non-destructive testing by its employees, contractors and vendors. Each Labino light referred to in this section is measured in accordance with this testing method and a serialized unit test report is included with each light. A type test report that contains more detailed data can be supplied on request. All Airbus AITM6-1001 (issue 12) compliant products are listed on page 8 of the 2023 catalog.

Download our 2023 Catalog

Please be advised that generic UV lights that have several UV LEDs mounted within a few millimeters from one another in a small housing create an excessive amount of heat which significantly shortens the life of the LEDs. Due to the small housing and large number of LEDs you cannot observe the LEDs failing as there is still some light coming out, albeit diminishing rapidly, unable to verify compliance with ASTM E3022 and consequently NADCAP checklists. ASTM E3022 requires that critical components such as failed LEDs be replaced before use.

WARNING! – USE OF UV LIGHTS CAN CAUSE HARM TO YOUR EYES AND SKIN, PROTECT YOURSELF AGAINST UV EXPOSURE AT WORKPLACE.

Inspector KITs for NDT

The ultimate inspector kit, "Stockholm" (PN: K001) to carry field inspections in a professional and reliable manner. All UV lights included are tested and certified to comply with ASTM E3022-18.

Stockholm kit (PN: K001) includes 3 highly durable UV lights and 1 UV and White Light meter:

(a) MB 3.0 Zeus handheld UV light with Athena spray can holder - PN: L122;

(b) UVG3 2.0 Midlight UV Flashlight - PN: L135;

(c) UVG5 2.0 Midlight UV Headlight - PN: L128;

(d) Apollo 3.0 UV and White Light meter - PN: M505.

VIEW INSPECTOR KIT VIDEO

UV lights in the standard kit can be replaced with other models within the same series upon request. Selected UV models from each Series have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001.

Members of the US military should ask for PN: K002 as it has been customized to meet USAF requirements.

Three additional KITs are available, Gothenburg (PN: K003), Malmo (PN: K004) and Uppsala (PN: K005), if not all four units are required.

BB 2.0 Ikaros UV LED light

Powerful, penetrant resistant and with an Ingress Protection 68 (IP68 Waterproof).

Beam profile is the largest and smoothest than any other portable UV LED light on the market today. The BB 2.0 Ikaros model has a beam diameter of 10.6 inches / 27 cm and with intensities that does not exceed ≈ 5 000 μW/cm2.

View BB 2.0 Series video

Selected models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery running time for BB 2.0 Ikaros is 7 hours.

Members of the US military should ask for BB 2.0 Helios (PN for AC powered: L1076, PN for Battery powered: L1077) or BB 2.0 Ikaros (PN for AC powered: L1074, PN for Battery powered: L1075).

Your choice from the top right menu complies with:

UVG3 2.0 Floodlight UV LED flashlight

Powerful, penetrant resistant UV LED flashlight and with an Ingress Protection 68 (IP68 Waterproof). Ideal for inspectors to carry on the NDT floor for quick inspections. This is an extremely light and compact UV LED Flashlight.

The beam profile is the largest and smoothest than any other UV LED flashlight on the market today. The Floodlight model has a beam diameter of 5 inches / 12 cm and with intensity that does not exceed ≈ 5 000 μW/cm2.

Selected models have been tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001. Battery running time for the UVG3 2.0 Floodlight is 4 hours.

Members of NATO military should ask for UVG3 2.0 Midlight (PN: L135) - NATO STOCK NUMBER (NSN): 6230226200609. The Double kit (two UVG3 2.0 Midlights included) is PN: L1086.

Your choice from the top right menu complies with:

GX Orion (UV only) Stationery LED light

Modular stationery UV LED system, designed to work 24x7, that allows you to design the desired covered area by mounting together multiple units.

GX Orion is the only stationery UV LED system on the market that offers ALL of the following qualifications:

(a) Certified with an ingress protection marking of IP68 Waterproof,

(b) classified as penetrant resistant,

(c) tested to comply with ASTM E3022-18, Rolls-Royce RRES 90061 and Airbus AITM6-1001, and

(d) carries a 4-YEAR WARRANTY, the longest in the industry!

Six years after its introduction to market, GX Orion has a track record of ZERO failed LEDs. It has been sold to over 50 countries worldwide.

Members of the US military should ask for GX Orion UV only (PN: L3102).

View GX Orion video Your choice from the top right menu complies with:

Hercules Ex UV LED light

Designed upon request of the military, Hercules is probably the most durable and shockproof UV light in the world today, suitable for any "heavy duty" environment. Accidentally Dropped it, kicked it, run it over by a tank, baked it in an oven? - it will still work! - The battery is inside the light, you don't need to worry it got smashed like ordinary lights. In a tough environment such as non-destructive testing, you want the best NDT equipment possible to avoid disruptions. Six years after its introduction to market, Hercules Ex has a track record of ZERO failed LEDs.

View Hercules Ex video

Hercules Ex is the first and only UV inspection light on the market today with explosion proof approvals that complies with ASTM E3022-18 and all PRIMES requirements, including Rolls-Royce RRES 90061 and Airbus AITM6-1001.

Labino is undergoing regular audits to maintain the explosion proof status of Hercules Ex. Our auditor on this product is Intertek. Hercules Ex ATEX certification number is ITS17ATEX402144X.

How to identify fake EX products video

If anyone offers you an explosion proof product, you should ask for

(a) the certification number

(b) who the auditor is

and check its authenticity online (www.iecex-certs.com). Manufacturers are obligated to share this information in their marketing literature. All certificates can be retrieved online, on the auditors website. There are fake explosion proof products from China, some re-branded, without certifications, distributed in the USA and Europe today. Don´t take "trust me" for an answer. You do not want an uncertified product on an oil rig or a refinery.

Members of the US military should ask for PN: L3000.