Select the Correct UV-A Lamp for Your NDT Needs

Select the Correct UV-A Lamp for Your NDT Needs

Select the Correct UV-A Lamp for Your NDT Needs Blog | 02.10.20 For decades, Mercury and Xenon technology dominated fluorescent inspection methods such as liquid penetrant testing or magnetic particle inspections. While the Xenon technology (MPXL) is still in use,...
ISO/IEC 17025 Accreditation

ISO/IEC 17025 Accreditation

ISO/IEC 17025 Accreditation Blog | 18.09.20 Since August 7th, 2019, Labino AB is an accredited calibration laboratory as per ISO/IEC 17025 with scope in UV-A and white light calibrations. Our accreditation has been approved by the Swedish board SWEDAC and carries an...
Why do we need ASTM E3022-18?

Why do we need ASTM E3022-18?

Why do we need ASTM E3022-18? Blog | 17.09.20 ASTM E3022-18 was created to fulfil the need for a standard outlining the minimum requirements needed to confirm that a UV LED light is suitable for inspections in an application as critical as NDT. Unless you can replace...
BB 2.0 Series – New product

BB 2.0 Series – New product

BB 2.0 Series – New product Blog | 17.09.20 The BB 2.0 Series is penetrant resistant and has Ingress Protection 68 (IP68 Waterproof). It has a new optical system with 8 UV LEDs. The beam profile is probably the largest and smoothest of any handheld UV light on...
What are the tests required for each model?

What are the tests required for each model?

What are the tests required for each model? Blog | 17.09.20 Tests on the lamp model (referred to as Type Test Report) must be made available to users by the UV lights manufacturer. The manufacturer cannot claim compliance by only supplying a unit test report and not...