Select Page

CLEAN ROOM

Use Labino Ultra Violet Lamps to detect particles as small as 30 μm that are not visible to the human eye and prevent contamination in the clean room.

UV inspection after Cleaning Machined Castings prior to delivery

Regardless of what cleaning methods you use to clean your machined plastic or metal parts from contamination, you need to validate that the part is clean. If inspecting the cleaned parts with Ultra Violet light, you will detect contamination that is not possible to see with the human eye. By adding UV inspection to your quality process you ensure that clean parts are delivered to your customer.

 

  1. MACHINED CASTINGS
  2. CLEANING IN BATHS OR TANKS
  3. INSPECTION WITH UV LIGHT
  4. PACKAGING IN CLEAN ROOM, CROSS FLOW CABINET OR EQUAL.
UV inspection prior to assembly in Clean Room

Products sensitive to contamination must be assembled in a certified clean room or in a clean environment. It is of utter importance that the parts are clean prior to entering the assembly. Illuminating the parts with Ultra Violet light prior to entering the clean room decreases the risk of contamination.

 

  1. INCOMING PARTS
  2. CLEANING WITH VACUUM CLEANER AND WIPES
  3. INSPECTION WITH UV LIGHT
  4. PARTS ENTER CLEAN ROOM FOR FINAL ASSEMBLY
UV inspection during assembly in a Cross Flow Cabinet

If your assembly process doesn’t include the use of a classified clean room, a Cross Flow cabinet could be very efficient. The cabinet keeps the air clean and the assembly process secured. However, the parts need to be clean when entering the cabinet. By inspecting the parts with Ultra Violet light inside the cabinet you ensure that the parts are clean prior to being assembled.

 

  1. INCOMING PARTS
  2. CLEAN PARTS WITH VACUME CLEANER AND WIPES
  3. PARTS ENTER CROSS FLOW CABINET
  4. INSPECTION WITH UV LIGHT AND ASSEMBY IN CROSS FLOW CABINET
Recommended products

Handheld with large beam

The BB 2.0 series is designed for non-destructive testing applications that require a large beam. The main difference between the various models are intensity and the choice of power source. All models have penetrant resistant sealing in combination with a large beam, extraordinary cooling and high durability.

 

Flashlight UVG3 2.o Midlight

The UVG3 2.0 series are flashlights intended to be used in nondestructive testing applications where space is limited. What differs the different UVG3 models are mainly beam size and intensity. What unites all models is a waterproof ingress protection (IP68) and penetrant resistant sealing in combination with a small size and a light weight.

 

Related articles

Lingtec, our NEW Labino Calibration Centre in Malaysia, Asia
Lingtec, our NEW Labino Calibration Centre in Malaysia, Asia

We are happy to share that our partner Lingtec has been certified to become the Labino Calibration Centre for Asia. Dr. Oliver Schalk from Labino performed a successful training with the Lingtec team and certified their entire calibration process. Congratulations Richard Ling and the entire Lingtec team!

Apollo 3.1 – luminance meter for radiographic inspection
Apollo 3.1 – luminance meter for radiographic inspection

Labino is proud to launch Apollo 3.1. The new generation of the Apollo photometer can be used as a luminance meter for radiographic inspection by attaching a specially designed luminance tube. The tube comes with two support stands to allow easy scanning of a radiographic film.

MENU